1.4435
00Cr17Ni14Mo2, X2CrNiMo18.14.3, 1.4435, Z 3 CND 17.11.02, TS 60, X2CrNiMo18.14.3, 1.4435, X2CrNiMo18.14.3, 1.4435, X2CrNiMo18.15.4, 1.4438, X2CrNiMo18.14.3,
1.4435数据表下载
1.4435化学成分 - DIN 17440 (1996)
| C | Si | Mn | P | S | Ni | Cr | Mo |
|---|---|---|---|---|---|---|---|
| ≤0.030 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 12.00-15.00 | 16.00-18.00 | 2.00-3.00 |
1.4435标准规范
- DIN 17440 (1996) - Stainless steels - Technical delivery conditions for drawn wire
- DIN 17441 (1997) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
- DIN 17455 (1985) - Welded circular tubes of stainless steels for general requirements; technical delivery conditions
- DIN 17456 (1985) - Seamless circular tubes of stainless steels for general requirements; technical delivery conditions
- DIN 17457 (1985) - Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
- DIN 17458 (1985) - Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
- DIN EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
- DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- DIN EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
- DIN EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
- DIN EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- DIN EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- DIN EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- DIN EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
- DIN EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- DIN EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
- DIN EN 10272 - Stainless steel bars for pressure purposes
- DIN EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
- DIN EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4435机械性能
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | Type | 最小值 | 最大值 | 近似值 | 备注 |
|---|
1.4435产品形态
- 热轧和冷拉棒材, 圆棒, 扁钢, 六角棒, 八角棒, 空心棒
- 带钢和钢卷, 热轧带钢, 热轧钢卷, 冷轧钢带, 冷轧钢卷
- 冷轧板材, 热轧板, 冷轧薄板, 中厚板, 高强钢板
- 热轧和冷拉异型钢, 凹凸字钢, 滑轨, 滑块
- 热轧和冷拉钢丝, 扁丝, 盘条, 直条
- 自由锻和模锻, 扁钢, 模块, 环, 桶, 饼, 阶梯轴及定制化
- 热挤压和冷轧无缝管, 异型管, 方管, 毛细管
- 电渣锭