A 681 D2

A 681 D2化学成分 - A 681 (2008)

C	Si	Mn	P	S	Cr	Ni	Cu	V	Mo
1.40-1.6	≤0.6	≤0.6	≤0.03	≤0.03	11.50-13.00	≤0.25	≤0.30	≤1.00	≤0.70

---

A 681 D2标准规范

• A 681 (2008) - Tool Steels Alloy

---

A 681 D2机械性能

D2 steel is high wear-resisting micro deformation of cold work die steel, belong to the wind type hard tool steel.The mass fraction of the carbon steel is as high as 1.5%, mass fraction of chromium is as high as 11.5%, the hardness after heat treatment can reach 60 HRC, but relatively ductility, toughness, rust resistant ability is weak, the steel surface is also difficult to make mirror polishing processing.With cold stamping products towards high precision, high efficiency, the development of more varieties, for die steel has good abrasion resistance and toughness.Compared with Cr12MoV steel, on chemical composition of the steel increased Mo, V, changed the steel casting organization, improved the morphology of austenite dish, strong toughness and abrasion resistance is better than that of Cr12MoV steel, improve the service life of the mold.Due to the yield point and the plastic deformation resistance of the steel is Cr12MoV steel is high, so the forging properties and hot molding Cr12MoV steels are slightly older.

hardness
Annealing acuities were 255 hb, indentation diameter of 3.8 mm or more;
Quenching acuity 59 HRC
Heat treatment specification
Quenching, 820 + 15 ℃ preheat, 820 + 6 ℃ (salt bath) or 1010 + 6 ℃ heating furnace atmosphere,
Cold insulation 10 ~ 20 min, empty, 200 + 6 ℃ tempering.

---

A 681 D2产品形态

• 热轧和冷拉棒材, 圆棒, 扁钢, 六角棒, 八角棒, 空心棒
• 带钢和钢卷, 热轧带钢, 热轧钢卷, 冷轧钢带, 冷轧钢卷
• 冷轧板材, 热轧板, 冷轧薄板, 中厚板, 高强钢板
• 热轧和冷拉异型钢, 凹凸字钢, 滑轨, 滑块
• 热轧和冷拉钢丝, 扁丝, 盘条, 直条
• 自由锻和模锻, 扁钢, 模块, 环, 桶, 饼, 阶梯轴及定制化
• 热挤压和冷轧无缝管, 异型管, 方管, 毛细管
• 电渣锭

---