X1CrNiMoCuN20-18-7
X1CrNiMoCuN20.18.7, 1.4547, X1CrNiMoCuN20.18.7, 1.4547, X1CrNiMoCuN20.18.7,
X1CrNiMoCuN20-18-7数据表下载
X1CrNiMoCuN20-18-7化学成分 - BS EN 10028-7
| C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.02 | ≤0.70 | ≤1.00 | ≤0.03 | ≤0.01 | 19.50-20.50 | 17.50-18.50 | 6.00-7.00 | 0.18-0.25 | 0.50-1.00 |
X1CrNiMoCuN20-18-7标准规范
- BS EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- BS EN 10088-1 - Stainless steels - Part 1: List of stainless steels
- BS EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- BS EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- BS EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
- BS EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
- BS EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- BS EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- BS EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
- BS EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- BS EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
- BS EN 10272 - Stainless steel bars for pressure purposes
- BS EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
- BS EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X1CrNiMoCuN20-18-7机械性能
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | 最小值 | 最大值 | 近似值 | 备注 |
|---|
| 热处理 | Type | 最小值 | 最大值 | 近似值 | 备注 |
|---|
X1CrNiMoCuN20-18-7产品形态
- 热轧和冷拉棒材, 圆棒, 扁钢, 六角棒, 八角棒, 空心棒
- 带钢和钢卷, 热轧带钢, 热轧钢卷, 冷轧钢带, 冷轧钢卷
- 冷轧板材, 热轧板, 冷轧薄板, 中厚板, 高强钢板
- 热轧和冷拉异型钢, 凹凸字钢, 滑轨, 滑块
- 热轧和冷拉钢丝, 扁丝, 盘条, 直条
- 自由锻和模锻, 扁钢, 模块, 环, 桶, 饼, 阶梯轴及定制化
- 热挤压和冷轧无缝管, 异型管, 方管, 毛细管
- 电渣锭